1. I have an engineering assignment that requires designing a: paraplegic patient needs a mechanical device to assist with transitioning from a wheelchair into a Jacuzzi without any assistance from other parties. Assume the patient has good upper body and arm strength for design purposes. Remember that safety and reliability is paramount.
2. My project is Design Problem 1 in the Order Instructions attachment I attached.
And i will attach the assignment instructions with the order but please keep in mind the following:- 1-The assignment says that I should write the report using LateX or Overleaf. but all you have to do is just do it using Word and then i will convert it to a Latex file. 2- The report must include Maple or Matlab codes but don’t worry about them i will do them myself. 3- Please follow the input data and dimensions required. 4- Please follow the following Format for the report. 1- Title Page (( i will do it)). 2-Table of Contents. 3- Summary. 4- Recommendation. 5- Introduction. 6- Design Basis (Design Objectives, Performance Specifications, Design Inputs, etc.)
7- Design Methodology 8- Design Results and Discussion 9- Design Variations10- Conclusion. 11-Refferences 12- Appendices ( I will fill this part because it will contain the Codes ). And the details of each step is provided in the assignment instructions attachment under (( Typical report table of contents.)). Please note that each of those steps are explained in the assignment instruction file attached And finally please contact
me if you have any question